Pluvia 11

110mm Fullrange drive unit </ br> 6ohm single ferrite magnet

  • Unique 5 3/4in soft chrome or antique gold magnesium alloy cone
  • Wide operating range to 20KHz –gentle high frequency lift for superior off-axis performance
  • Shallow multiform cone profile –broad directivity pattern
  • Advanced low-distortion motor design
  • Long-stroke suspension with arrestor and progressive-rate spider
  • Low-profile surface-mount reinforced polymer basket

The Full Range audio driver that produces more bass

The Pluvia 11 is a completely new driver design. It is the first “full range” driver that can handle bass loads typically delivered by 5.5 inch to 6.5 inch mid-bass units used in most 2 way systems.

The Pluvia 11 cone is an entirely new design from Mark Fenlon. It uses a new super-strength aerospace grade alloy designed to cope with high bending stress loads. The material thickness is increased be 50% over previous Markaudio designs, yet the profile remains shallow to increase dispersion. Two more processes have been added to the Multiform cone production sequence to increase Pluvia 11’s operational low frequency load capacity.

The all-new front suspension has a variable thickness geometry, increasing oscillatory stability by 30% over previous designs. The rear suspension (spider) has an operational surface area 25% larger than the Alpair 10 to cope with load demands of typical mid-bass units. However, the Pluvia 11’s high range has not been sacrificed. It outperforms the smaller Alpair 10 by reaching slightly higher frequencies with an improved spread on the high range lift above 10kHz. Other design advances include the new “easy install” frame. This new-technology one-piece moulding utilises a GF30 glass fibre and resin mix. Pluvia 11’s frame is more rigid than previous designs, with a mounting depth of only 4.5mm, making both recessed and surface-mounting simple. Two new cone colours add visual interest. Along with the Pluvia 7, this new family of drivers will serve custom builders well into the future.

For the first time in the history of traditional full-range driver design, users now have a genuine choice to go full-range without sacrificing bass handling, or use it as a wide-range mid-bass driver that allows simple filtering.

The new Pluvia Eleven is an excellent high-end and multi-purpose driver. Its also suitable for many computer, Home Theatre, TV, and commercial A/V applications.

RE 5.4 Ohms
FS 39.118
SD 109.359 cm²
VAS 24.751 ltr
CMS 1.457m M/N
MMD 10.7 m Kg
MMS 11.358 g
BL 6.556 TM
QMS 1.797
QES .351
QTS .293
LE 68.550 uH
SPL 88.131 dB
X MAX 7mm 1 way
POWER (NOMINAL) 45 Watts
POWER (MAXIMUM) 90 Watts

Reviews

There are no reviews yet.

Be the first to review “Pluvia 11”

Your email address will not be published. Required fields are marked *

Log in with your credentials

or    

Forgot your details?

Create Account